Built with the legendary Phoenix Gold reliability, they feature heavy duty heatsinks, robust unregulated power supplies, and oversized direct input power and speaker terminals. RX2-series subwoofers are designed to give high performance at a great value.
They feature long wound 2. This results in an ability to create deep, accurate bass in vented or sealed enclosures. The RX series of components and coaxials utilizes a high performance midbass driver that is acoustically matched to a quality Mylar dome tweeter via a passive crossover. GX Series: Engineered for heart pounding performance and a breathtaking sound experience. Designed to cover a multitude of installation needs, GX is packed with the features and power you can expect from the Phoenix Gold brand.
This results in an ability to create deep, accurate bass in vented or sealed enclosures. The RX series of components and coaxials utilizes a high performance midbass driver that is acoustically matched to a quality Mylar dome tweeter via a passive crossover.
GX Series: Engineered for heart pounding performance and a breathtaking sound experience. Designed to cover a multitude of installation needs, GX is packed with the features and power you can expect from the Phoenix Gold brand. Included in the line are our proprietary PG quick connects for high current capability and reliability while delivering uber clean and quick installations. You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full.
In addition, it may be that your ISP may have a maximum size for emails to receive. If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual. Would you like to receive an email when new answers and questions are posted? Please enter your email address.
Phoenix Gold S Get this manual by email. Amplifier Manual. Need help? Post your question in this forum. Used to reach maximum amplifier power with a wide variety of headunits.
There is no signal loss if using this output. The high level auto on switch turns off the auto turn on function, but the high level input still works as normal.
This allows up to 20dB of volume adjustment. This is not a bass boost, it controls the level of the low pass signal. The fuse must be located within 18 inches of the battery. This is not used if using Hi input auto on feature. The front AND rear inputs must be used, if only the front input is used then the rear speaker outputs will have no output signal. This is not a bass boost, it controls the level of the entire low pass signal of the rear channels.
Install all system fuses. The fan on this amp does not run until a high enough temperature on the heatsink is reached, then it will slowly start spinning up. I found an issue with the fan on my amp. It made an awful noise when running, and I found it to be rubbing against the sheet metal bottom of the amp. After PG became aware of this they came up with a fan riser block idea within a day and were going to implement it into production.
This makes PG very proactive in my opinion and I am quite impressed. I must say it is a pretty rewarding experience to find a flaw in a product and have the manufacturer actually jump on the issue and resolve it in so little time.
This is just more evidence the "new PG" has high customer satisfaction as a target. I have to mention another unique aspect of this amp. It draws almost zero current while idle. There are no bias controls, which I believe is more evidence of Class B operation.
Now, don't let Class B change your opinion of this amp for the worse. A well designed Class B amp with a high amount of feedback can overcome crossover distortion often associated with Class B designs. While power testing this amp, I observed the output on an oscilloscope while under load, and I never found any evidence of crossover distortion. I am sure you are wondering about sound quality. I will not elaborate a whole lot on this, but I have listened to or owned nearly every PG amp made at one point or another, and this amp sounds just as good as any of them.
What more can you ask for? With PG amps it is not so much about how or what they sound like, it is how or what they don't, as they don't color the music in any way I have ever detected, and for the S And it is. Please add stereo bridging, and consider dumping the high level inputs in favor of RCA padding and a input switch. These changes would make things easier for those of us wanting to use this amp as a large 2-channel, which would complement the S
0コメント